Carpet area and loading calculator
How much of the area you are charged for you can actually use, and what each usable square foot costs.
Free · No sign-up · Works on a phone
The answer
- Price
- ₹80,00,000
- Loading on the carpet area
- 42.9%
- Common area, as a share of super built-up
- 30.0%
- Carpet area in square metres
- 65.03 sq m
- Price per sq ft of carpet area
- ₹11,429
Compare flats on the price per square foot of carpet area: it is the space you can actually use.
The short answer
Loading is how much bigger the area a flat is charged on is than its carpet area: the super built-up area divided by the carpet area, less one. To compare two flats fairly, divide each one’s total price by its carpet area, the floor area you can use as section 2(k) of RERA defines it.
How it is worked out
Price = super built-up area × rate
Loading on carpet area = super built-up area ÷ carpet area − 1
Price per sq ft of carpet = price ÷ carpet area
Square metres = square feet ÷ 10.7639
Loading is quoted two ways: as a share of the carpet area, or as the common area’s share of the super built-up area. The calculator gives both, so check which one a builder or a broker means before comparing figures.
Work out each flat you are considering, and compare the price per square foot of carpet area. A flat quoted at a higher rate can be the cheaper one for the space you can use, if its loading is lower.
A worked example
| Super built-up area | 1,000 sq ft |
|---|---|
| Carpet area | 700 sq ft |
| Rate quoted per sq ft of super built-up | ₹8,000 |
| Price | ₹80,00,000 |
| Loading on the carpet area | 42.9% |
| Common area, as a share of super built-up | 30.0% |
| Carpet area in square metres | 65.03 sq m |
| Price per sq ft of carpet area | ₹11,429 |
Compare flats on the price per square foot of carpet area: it is the space you can actually use.
The terms it uses
- Carpet area
- The net usable floor area of a flat, as section 2(k) of RERA defines it. It includes the area under the internal partition walls and leaves out the external walls, service shafts, exclusive balconies or verandahs and exclusive open terraces.
- Built-up area
- The carpet area of a flat plus the area its walls stand on, and in most quotations its balcony as well.
- Super built-up area
- The built-up area of a flat plus its share of the building’s common areas, such as the lobby, lift wells, staircases and corridors. Also called super area or saleable area.
- Loading
- How much bigger the area a flat is charged on is than its carpet area. As a share of the carpet area, it is the super built-up area divided by the carpet area, less one.
Questions
What people ask next.
How do I calculate carpet area from super built-up area?
You cannot work it out reliably from the super built-up area, because the loading differs from building to building. Ask for the carpet area: under RERA it has to be stated in the agreement for sale.
What is a normal loading?
There is no fixed figure. It depends on how much common area the building has, such as lobbies, lifts and amenities. Work it out from the carpet area in the agreement rather than relying on a typical percentage.
Is the balcony part of the carpet area?
No. Under section 2(k) of RERA, a balcony, verandah or open terrace for the flat’s exclusive use is left out of the carpet area, and its area is stated separately.
Do it with True Property Cost
The whole picture, not one sum.
What an under-construction property really costs by possession, and what it really yields once let: every instalment, plus what the money cost while it was tied up, own funds and loan each at its own rate.