# Carpet area, built-up area and super built-up area: what you are paying for

A flat is sold in square feet, but not always the same square feet. Which area the price is quoted on can make a cheaper-looking flat the dearer one.

## The short answer

Carpet area is the floor area you can actually use inside a flat’s walls, as section 2(k) of RERA defines it: it leaves out the external walls, service shafts, exclusive balconies and open terraces. Built-up area adds the walls and, usually, the balcony. Super built-up area also adds a share of the lobby, lifts, staircases and other common areas, which is called loading. To compare two flats, divide each total price by its carpet area.

## The three areas, from smallest to largest

- Carpet area: the net usable floor area inside the flat. It includes the area under the internal partition walls, and leaves out the external walls, the service shafts, any balcony or verandah for the flat’s exclusive use and any exclusive open terrace.
- Built-up area: the carpet area plus the area the flat’s walls stand on, and in most quotations its balcony as well.
- Super built-up area: the built-up area plus the flat’s share of the building’s common areas, such as the entrance lobby, lift wells, staircases, corridors and sometimes the clubhouse. It is also called super area or saleable area.

## What RERA changed

Before the Real Estate (Regulation and Development) Act, 2016, carpet area had no definition in law, and each builder measured it its own way. Section 2(k) of the Act now defines it in the words above, and section 4(2)(h) requires a builder registering a project to state the number, type and carpet area of the flats for sale, with the areas of exclusive balconies, verandahs and open terraces given separately.

Some state authorities have gone further. Haryana’s, for example, requires flats in registered projects to be sold on carpet area only, with the rate inclusive of all charges, rather than on super area.

## Loading, and why it matters

Loading is how much bigger the area you are charged for is than the area you can use. It is quoted in two ways, as a share of the carpet area or as a share of the super built-up area, so check which before comparing two figures.

> Loading = super built-up area ÷ carpet area − 1

A rate per square foot on super built-up area tells you little on its own, because the same rate on a building with heavy loading buys much less usable space. The rate that compares like with like is the total price divided by the carpet area.

## A worked example

Two flats in the same area. Flat A is offered at ₹8,000 a square foot on 1,000 square feet of super built-up area, so ₹80,00,000, and its carpet area is 700 square feet. Flat B is offered at ₹8,400 a square foot on 950 square feet, so ₹79,80,000, and its carpet area is 720 square feet.

**The same two flats, on the area you can use**

|   | Flat A | Flat B |
| --- | --- | --- |
| Super built-up area | 1,000 sq ft | 950 sq ft |
| Rate quoted | ₹8,000 | ₹8,400 |
| Price | ₹80,00,000 | ₹79,80,000 |
| Carpet area | 700 sq ft | 720 sq ft |
| Loading on carpet area | 42.9% | 31.9% |
| Price per sq ft of carpet | ₹11,429 | ₹11,083 |

Flat B is quoted at the higher rate, yet it gives you 20 more square feet to live in for ₹20,000 less, and costs ₹11,083 for each square foot you can use against ₹11,429 for flat A.

## Square metres and square feet

RERA registrations and agreements often state areas in square metres. One square metre is 10.7639 square feet, so a carpet area of 65 square metres is 699.65 square feet, about 700.

## What to ask before you book

1. The carpet area, as section 2(k) of RERA defines it, written into the agreement for sale.
2. The areas of any exclusive balcony, verandah or open terrace, stated separately.
3. What the price includes: parking, preferential location charges, clubhouse and other charges.
4. The super built-up area the rate is quoted on, so you can work out the loading yourself.

Work it out on your own figures: [Carpet area and loading calculator](https://www.thefinanceintelligence.com/calculators/carpet-area).

## Questions

### Is the balcony part of the carpet area?

No. Under section 2(k) of RERA, a balcony, verandah or open terrace for the flat’s exclusive use is left out of the carpet area, and its area is stated separately.

### Are internal walls included in the carpet area?

Yes. The area under the internal partition walls is part of the carpet area. The external walls are not.

### What is a normal loading?

There is no fixed figure. It depends on how much common area the building has, such as lobbies, lifts and amenities. Work it out from the carpet area in the agreement rather than relying on a typical percentage.

### Which area should I compare flats on?

Carpet area. Divide each flat’s total price by its carpet area and compare those figures.

## Sources

- [Sale of apartments and floors in a real estate project on the basis of carpet area: regulations, 2021 (quoting RERA sections 2(k) and 4(2)(h))](https://haryanarera.gov.in/regulations/Sale_of_ApartmentsFloors_in_a_Real_Estate_Project_on_the_basis_of_Carpet_Area.pdf), Haryana Real Estate Regulatory Authority, Gurugram

The tool this guide leads to: [True Property Cost](https://www.thefinanceintelligence.com/tools/true-property-cost).

---

Source: https://www.thefinanceintelligence.com/guides/carpet-area-vs-built-up-vs-super-built-up (updated 2026-10-28)
The Finance Intelligence is a set of web tools, free calculators and guides for finance work in India, built by chartered accountants. Contact: team@thefinanceintelligence.com.
